Author Topic: H-BOT Eve Pilot 2 FREE Eve Online Bot (Read 73496 times)

H-BOT · « **on:** August 20, 2012, 06:27:52 PM »

Use this little app for faster traveling in Eve Online. It will warp to zero to the destination gates until destination is reached. At the end autopilot is activated so the ship docks if you set a station as a destination.

No configuration needed! Just set a destination in Eve and click "Start H-Bot Eve Pilot". The only requirements are to have the default D+clicking shortcut for jump in Eve, have the overview on the right side and the HUD docked to bottom.

Download H-Bot Eve Pilot ver. 2.4
upload date: 27-07-2015

Mano Keali`i · « **Reply #1 on:** October 23, 2012, 06:27:56 AM »

Hello Mr. Admin!
I tried the new updated EP, but it doesn't work at all. It simply doesn't do anything. I put the game client into windowed mode, make overview on the right side, then put the EP bot on top of the game client window and press start - simply doesn't do anything.
It only says "Initialising", then "Running, move your mouse cursor to stop" but nothing happens.

H-BOT · « **Reply #2 on:** October 24, 2012, 12:27:20 AM »

Quote from: Mano Keali`i on October 23, 2012, 06:27:56 AM

Hello Mr. Admin!
I tried the new updated EP, but it doesn't work at all. It simply doesn't do anything. I put the game client into windowed mode, make overview on the right side, then put the EP bot on top of the game client window and press start - simply doesn't do anything.
It only says "Initialising", then "Running, move your mouse cursor to stop" but nothing happens.

Hello, just tested it and it works.

Make sure to
-have only gates loaded in overview and destination is set
-Don't move the mouse after you click start
-D+clicking shortcut for jump in Eve exists
-Have only one Eve client open when you run it.

You can send me a screenshot to support@reboot.gr if you still have problem.

Mano Keali`i · « **Reply #3 on:** October 24, 2012, 09:11:51 PM »

Hello Mr. Admin! I have everything setup right as you wrote. But the EP doesn't work at all. It just doesn't move the cursor.
http://img.maryno.net/images/078406b34fac006b1c44735415af66d4/ac123f8cd762eb87731ffab132fac907.jpeg
http://img.maryno.net/images/be7a7ed8e7cff89ec740369abcf1346a/5bfe0ce1c316f437ab1c9df30ff668a9.png

Thanks in advance!

Clevik · « **Reply #4 on:** November 27, 2012, 11:22:22 AM »

Is working great for me. Much better than old eve pilot and makes it easy to switch between characters without resetting all the settings.

redgabber · « **Reply #5 on:** November 29, 2012, 12:44:45 AM »

Hi, same here does not work.

"Initialising", then "Running, move your mouse cursor to stop"

the overview is ok, the mouse goes to the selected next gate but i hear the key sound (D) "ding !" and it fails

the "H-BOT" mouse click does not seem to work properly

Clevik · « **Reply #6 on:** November 30, 2012, 08:11:35 PM »

With the change to corp hangars being scannable for orcas, it would be sweet to add some blockade runner functionality (especially since they will be unscannable). Being able to check a "use cloak" box and as soon as the bot engages warp it presses F1 to engage a cloak would be awesome. Would add a little bit of security to moving more expensive mods.

allied777 · « **Reply #7 on:** December 09, 2012, 03:59:43 PM »

Makes 5 jumps and goes on autopilot. So it should be?

H-BOT · « **Reply #8 on:** December 09, 2012, 04:06:21 PM »

Quote from: allied777 on December 09, 2012, 03:59:43 PM

Makes 5 jumps and goes on autopilot. So it should be?

No it should go until there are no yellow gates in overview.
Do you have only gates in overview ?
Is your eve laggy ?

allied777 · « **Reply #9 on:** December 09, 2012, 04:57:32 PM »

http://SSMaker.ru/df63547b/
No lag

H-BOT · « **Reply #10 on:** December 11, 2012, 01:19:20 AM »

New version 2.1 uploaded
-fixed bug starting the eve autopilot before reaching destination if jumping is delayed few seconds.
-added logs to see what's happening.
-algorithm improved.

download it here

ThomassJ · « **Reply #11 on:** January 24, 2013, 10:28:44 PM »

Hi developer.
I use EVE Pilot quite a long time with no problems and recently I downloaded this new version. It works very well, but I have some proposals for improve:

1) I am used to use 90% UI scaling and Pilot doesn´t work with it. I always have to rescale it to 100% in order to use it. Is there some possibility to make it work with 90% too?

2) I was used to watch a movie while autopiloting. I use VLC media player and this new version of Pilot doesn´t run while watching movie. What to do with it?

Otherwise I appreciate EVE Pilot as very good tool.

rstark · « **Reply #12 on:** February 21, 2013, 08:13:09 AM »

Prior to the Eve Retribution update this bot worked for me. Now when the bot starts it immediately says "Approaching Gate"

Is anyone else having this issue?

marcelser · « **Reply #13 on:** October 08, 2014, 02:13:37 AM »

Hello Dear Admin,

Any chance that you will improve docking. I tried setting up an overview which shows gates & stations but at destination h-bot did not use the station which was marked yellow. All you would have to do when you reach destination (no more yellow circles), scan for yellow recantgles and just D+click shortcut again, should be an easy change. Of course people would have to increase the size of the overview to show all items (gates & stations) in systems like jita. But it should be very easy.

The actual H-bot definitly has weaknesses there, cause when it reaches destination h-bot just sits there for a very long time I'd say 30-40 seconds doing nothing which gives attackers time to approach, warp scramble and attack your ship. And then it activates autopilot, so after warping your ship has to travel the distance to the station which can also take a huge amount of time given a ship like the obelisk or so again giving attackers time to destroy your ship.

BaNZ · « **Reply #14 on:** October 11, 2014, 12:55:15 AM »

Does this still work? I keep getting can't find important coordinates when I click on start.

Turns out just need to run it in window mode.

puuretrunks · « **Reply #15 on:** November 29, 2014, 10:18:38 AM »

Hello, is the bot still working? tested it out and done all the steps, keeps saying "Can't find ov arrow"

Bracco · « **Reply #16 on:** December 17, 2014, 10:54:20 PM »

any news

H-BOT · « **Reply #17 on:** December 20, 2014, 02:10:54 AM »

New version 2.3 uploaded.

http://www.reboot.gr/download/ep2.zip

Bracco · « **Reply #18 on:** December 20, 2014, 11:48:57 AM »

not work

wuan · « **Reply #19 on:** December 21, 2014, 12:54:27 AM »

Thanks for the update!

Unfortunately still doesnt work for me; if i check the version (in about) it says its still 2.1, is it really 2.3 or 2.1?

Also when opening the archive, "modified" field value is 11-Dec-12 1:08 AM

Using this link: http://www.reboot.gr/download/ep2.zip

Again, many thanks for your effort